Sale!

AASHTO M 85-16 Download

$25.00

Standard Specification for Portland Cement (ASTM Designation: C150/C150M-16)
standard by American Association of State and Highway Transportation Officials, 2016

Category:

Description

This specification covers ten types of portland cement as follows:

  • Type I-For use when the special properties specified for any other type are not required.
  • Type IA-Air-entraining cement for the same uses as Type I, where air-entrainment is desired.
  • Type II-For general use, more especially when moderate sulfate resistance or moderate heat of hydration is desired.
  • Type IIA-Air-entraining cement for the same uses as Type II, where air-entrainment is desired.
  • Type III-For use when high early strength is desired.
  • Type IIIA-Air-entraining cement for the same use as Type III, where air-entrainment is desired.
  • Type IV-For use when low heat of hydration is desired.
  • Type V-For use when high sulfate resistance is desired.

Note–Some cements are designated with a combined type classification, such as Type I/II, indicating that the cement meets the requirements of the indicated types and is being offered as suitable for use when either type is desired.

Product Details

Published:
2016
Number of Pages:
15
File Size:
1 file , 1.3 MB
Product Code(s):
M085-16-UL, M085-16-UL